Comments for page "DigiPeating" http://aprsisce.wikidot.com/forum/t-630615/digipeating Posts in the discussion thread "DigiPeating" Sun, 09 Aug 2026 10:11:05 +0000 http://aprsisce.wikidot.com/forum/t-630615#post-5244303 Implementing Bob WB4APR's "Fixing LA" in APRSISCE/32 on Windows 10 Computer with TNC-2 http://aprsisce.wikidot.com/forum/t-630615/digipeating#post-5244303 Tue, 29 Mar 2022 03:58:33 +0000 Richard Driscoll 7957060 Good Evening All,

David WB5HJV and I are trying to implement the recommendations contained in Bob's article from 2005 on the APRS website titled "Fixing LA". Unfortunately I am not familiar with the command structure in APRSISCE/32. David is the operator of the W9MAC-1 digitpeater/gateway in Houston and I am trying to assist him in this implementation.

This is what we have so far:

<!RFPort[0]>
<RFPort Name="TNC2">
<Protocol>Simply(KISS)</Protocol>
<Device>COM5:9600,N,8,1</Device>
<RfBaud>1200</RfBaud>
<OpenCmd>~!!0</OpenCmd>
<CloseCmd>~!!0</CloseCmd>
<QuietTime>60</QuietTime>
<Enabled>1</Enabled>
<XmitEnabled>0</XmitEnabled>
<ProvidesNMEA>0</ProvidesNMEA>
<RFtoISEnabled>1</RFtoISEnabled>
<IStoRFEnabled>0</IStoRFEnabled>
<MyCallNot3rd>0</MyCallNot3rd>
<NoGateME>1</NoGateME>
<BeaconingEnabled>1</BeaconingEnabled>
<BeaconPath></BeaconPath>
<BulletinObjectEnabled>0</BulletinObjectEnabled>
<DXEnabled>0</DXEnabled>
<DXPath></DXPath>
<MessagesEnabled>0</MessagesEnabled>
<MessagePath></MessagePath>
<TelemetryEnabled>0</TelemetryEnabled>
<TelemetryPath></TelemetryPath>
<!DigiXform>
</RFPort>
<!RFPort[0]>
<DigiXform>WIDE2-1=W0MAC-1</DigiXform>
<DigiXform>WIDE2-2=W0MAC-1</DigiXform>
<DigiXform>WIDE3-1=W0MAC-1</DigiXform>
<DigiXform>WIDE3-2=W0MAC-1</DigiXform>
<DigiXform>WIDE3-3=W0MAC-1</DigiXform>
<DigiXform>WIDE4-1=W0MAC-1</DigiXform>
<DigiXform>WIDE4-2=W0MAC-1</DigiXform>
<DigiXform>WIDE4-3=W0MAC-1</DigiXform>
<DigiXform>WIDE4-4=W0MAC-1</DigiXform>
<DigiXform>WIDE5-1=W0MAC-1</DigiXform>
<DigiXform>WIDE5-2=W0MAC-1</DigiXform>
<DigiXform>WIDE5-3=W0MAC-1</DigiXform>
<DigiXform>WIDE5-4=W0MAC-1</DigiXform>
<DigiXform>WIDE5-5=W0MAC-1</DigiXform>
<DigiXform>WIDE6-1=W0MAC-1</DigiXform>
<DigiXform>WIDE6-2=W0MAC-1</DigiXform>
<DigiXform>WIDE6-3=W0MAC-1</DigiXform>
<DigiXform>WIDE6-4=W0MAC-1</DigiXform>
<DigiXform>WIDE6-5=W0MAC-1</DigiXform>
<DigiXform>WIDE6-6=W0MAC-1</DigiXform>
<DigiXform>WIDE7-1=W0MAC-1</DigiXform>
<DigiXform>WIDE7-2=W0MAC-1</DigiXform>
<DigiXform>WIDE7-3=W0MAC-1</DigiXform>
<DigiXform>WIDE7-4=W0MAC-1</DigiXform>
<DigiXform>WIDE7-5=W0MAC-1</DigiXform>
<DigiXform>WIDE7-6=W0MAC-1</DigiXform>
<DigiXform>WIDE7-7=W0MAC-1</DigiXform>

I would appreciate any useful comments or suggestion as to what I am missing.

Sincerely,

Richard
KD5URB

]]>