HF iGATE http://aprsisce.wikidot.com/forum/t-691285/hf-igate Posts in the discussion thread "HF iGATE" - Map overflowing with VHF traffic Sun, 19 Apr 2026 14:06:08 +0000 http://aprsisce.wikidot.com/forum/t-691285#post-1851421 Re: HF iGATE http://aprsisce.wikidot.com/forum/t-691285/hf-igate#post-1851421 Fri, 13 Sep 2013 18:48:01 +0000 APRS IS CE 440686 The APRS-IS system really doesn't know if a packet arrived via HF or VHF. I suspect the reason you're getting VHF stations is that you have not changed the default Configure / General / Range of 50 miles to be something smaller, like 1 or 0. APRSISCE/32 automatically provides a filter for the APRS-IS and the Range is included in that filter resulting in "close" stations being received with no user effort (unlike some other clients that require entry of a filter to receive anything).

Also make sure that you don't have anything in Configure / General / Add Filter because that will also cause APRS-IS traffic to be received.

Another way is to check View / None followed by View / RF / All. This will cause the map to only show stations that you received on your own RF port and will suppress everything received from the APRS-IS.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

]]> http://aprsisce.wikidot.com/forum/t-691285#post-1845455 HF iGATE http://aprsisce.wikidot.com/forum/t-691285/hf-igate#post-1845455 Wed, 04 Sep 2013 09:43:19 +0000 Selwyn Staples 1715322 Greetings,

I am using APRSIS32 as a HF iGate on 10.147MHz
Settings are as follows:
Config - port - Localhost [AGW] - RF to IS
Config - scroller - RF only
View- chooser - RF Direct
The scroller only shows incoming HF traffic, however the map is cluttered with VHF traffic.
How do I eliminate the VHF symbols???

Regards,

Sel [zs6ss]

]]>