IS to RF http://aprsisce.wikidot.com/forum/t-871592/is-to-rf Posts in the discussion thread "IS to RF" Sun, 09 Aug 2026 10:33:11 +0000 http://aprsisce.wikidot.com/forum/t-871592#post-2380545 Re: IS to RF http://aprsisce.wikidot.com/forum/t-871592/is-to-rf#post-2380545 Wed, 23 Sep 2015 20:26:46 +0000 Duarte Braga 2280769 Hi.

You can do this very easily (it took me a while to find the info, as it is not very spread):
1) Make sure you are running in development mode
2) Make sure your APRS-IS port is configured to allow IS-RF
3) Press CNTRL+G and insert a filter of the traffic you want to pass to RF (***see notes below)
4) Move to main Window and Press CTRL+I (then Enter) if nothing happens check the filter error log. If everything goes well, the igate log window will open and you are done.

Regarding the filters, go to page aprs-is-filters in this forum

]]> http://aprsisce.wikidot.com/forum/t-871592#post-2048050 IS to RF http://aprsisce.wikidot.com/forum/t-871592/is-to-rf#post-2048050 Sun, 08 Jun 2014 13:49:52 +0000 KK4LQX 1908384 Hello Everyone,

I have been using APRSIS-32 for about a year now and have most things figured out. The one thing I can't find is how to have APRSIS-32 take objects that are on IS only and have them sent out over RF.

One specific example of this is my neighbor has a weather station that he has going out over IS only. I would like to take this data and packets and TX them over RF.

Any help with this would be greatly appreciated.

Thanks

]]>