Autostart of APRS-IS (After reboot)

Autostart of APRS-IS (After reboot)

LA1BCA 19 Sep 2017 15:35

Hi,

I have been surfing around here in the forum to find something about a problem I am not aware of what can be the reason.!
What happen is - the APRS-IS software will not transmit when it starts after an 'exit' of the software or after a 'reboot' om my computer.!
I have copied the shortcut to the software into the Windows Startup folder, so the software starts together with Windows startup.

(The APRS-IS starts in 'Suspended Mode' and the transmit need to be done 'manually' every time after starting up the software - to confirm the location.)

Are there any settings to fix this problem.??

This queston have already been up here in the forum - from KE5UUO,
but no answers to that post.!

I would like to know if someone can give me a clue of sulution for this..!!

Re: Autostart of APRS-IS (After reboot)

APRS IS CE 19 Sep 2017 15:44

I suspect you have Configure / Beacon / After Transmit checked. This option is designed for users that have no GPS, but yet are mobile (for instance, on a trip checking into different hotels). If this is checked, APRSISCE/32 will not transmit the saved "stale" location until the operator has had a chance to re-center the map on the current location and then manually hit Transmit moving ME to the new screen center.

If you do not have Configure / Beacon / After Transmit checked, please repost and I'll noodle for another possible cause.