I see new Kenwood D710 as a possible connection and KISS but not older rigs like the D700 and the still current Alinco DR135 with TNC board installed. I have both of them. The D710 is different than the 700, TNC parameters are different.
We have a write up on the D700 but not the port commands like we do for the D710, Are you able to help by letting me know, whats different between the 2 so that I can add an entry? Like wise the DR135. I don't have these radios so am unable to test. The only thing I can do is read the manuals and write up something that might work. Happy to do that, if you can help out by testing.
I've got a DR-135 MkIII on the way and I am planning to use the Tracker2 board by argent and wondering if APRSIS32 will interface with it. Would you want to borrow a DR 135 with the Argent board to test and write?
Actually, that's the "APRS" radio that I started with. I own three of the radios, one with an internal T2-135 (KJ4OVQ-9), one with an OT2m (KJ4ERJ-9) and one with an Alinco EJ41 (?) TNC which was my voice radio until I picked up a D700 (KJ4ERJ-11).
Lock the T2-135 into KISS mode and use Simply(KISS) in APRSISCE/32 and you're home free.
I run both the T2-135 and the OT2m with port B in Garmin mode connected to Nuvi 350s for GPS feed, station display, and messaging.