Kenwood TH-D74

Kenwood TH-D74 Bluetooth Configuration

To configure your Kenwood TH-D74 for connection to a device running APRSICE/32 via bluetooth, you will need to access the menu in the radio, and configure a number of settings as follows:
Access Menu No. 400 Built-In GPS Select [On]
Access Menu No. 405 PC Output Select [On]
Access Menu No. 580 PC Output Select [Raw Packets]
Access Menu No. 930 Bluetooth Select [On]
Access Menu No. 981 PC Output (GPS) Select [Bluetooth]
Access Menu No. 982 PC Output (APRS) Select [Bluetooth]
Access Menu No. 983 KISS Select [Bluetooth]

In APRSIS32, on the port I have the following settings checked/filled out:
RF to IS
Enabled
Bulletin/Obj
Messages
Telemetry
GPS/NMEA